Galaxy, Planets etc

The topography of the Moon has been measured by the methods of laser altimetry and stereo image analysis, most recently from data obtained during the Clementine mission. The most visible topographic feature is the giant far side South Pole-Aitken basin, which possesses the lowest elevations of the Moon. The highest elevations are found just to the north-east of this basin, and it has been suggested that this area might represent thick ejecta deposits that were emplaced during an oblique South Pole-Aitken basin impact event. Other large impact basins, such as Imbrium, Serenitatis, Crisium, Smythii, and Orientale, also possess regionally low elevations and elevated rims. Another distinguishing feature of the Moon’s shape is that the elevations are on average about 1.9 km higher on the far side than the near side.

The continuous bombardment of the Moon by comets and meteoroids has most likely added small amounts of water to the lunar surface. If so, sunlight would split much of this water into its constituent elements of hydrogen and oxygen, both of which would ordinarily escape into space over time, because of the Moon’s weak gravity. However, because of the slightness of the axial tilt of the Moon’s spin axis to the ecliptic plane—only 1.5°—some deep craters near the poles never receive direct light from the Sun and are thus in permanent shadow (see Shackleton crater). Water molecules that ended up in these craters could be stable for long periods of time.

Clementine has mapped craters at the lunar south pole that are shadowed in this way, and computer simulations suggest that up to 14,000 km² might be in permanent shadow. Results from the Clementine mission bistatic radar experiment are consistent with small, frozen pockets of water close to the surface, and data from the Lunar Prospector neutron spectrometer indicate that anomalously high concentrations of hydrogen are present in the upper metre of the regolith near the polar regions.Estimates for the total quantity of water ice are close to one cubic kilometre.Water ice can be mined and then split into its constituent hydrogen and oxygen atoms by means of nuclear generators or electric power stations equipped with solar panels. The presence of usable quantities of water on the Moon is an important factor in rendering lunar habitation cost-effective, since transporting water from Earth would be prohibitively expensive. However, recent observations made with the Arecibo planetary radar suggest that some of the near-polar Clementine radar data that were previously interpreted as being indicative of water ice might instead be a result of rocks ejected from young impact craters.The question of how much water there is on the Moon has not been resolved.

Blanketed atop the Moon’s crust is a highly comminuted (broken into ever smaller particles) and “impact gardened” surface layer called regolith. Since the regolith forms by impact processes, the regolith of older surfaces is generally thicker than for younger surfaces. In particular, it has been estimated that the regolith varies in thickness from about 3–5 m in the maria, and by about 10–20 m in the highlands. Beneath the finely comminuted regolith layer is what is generally referred to as the megaregolith. This layer is much thicker (on the order of tens of kilometres) and comprises highly fractured bedrock.

The Moon is in synchronous rotation, meaning that it keeps nearly the same face turned towards the Earth at all times. Early in the Moon’s history, its rotation slowed and became locked in this configuration as a result of frictional effects associated with tidal deformations caused by the Earth.Long ago when the Moon spun much faster, its tidal bulge preceded the Earth-Moon line because it couldn’t “snap back” its bulges quickly enough to keep its bulges in line with Earth. The rotation swept the bulge beyond the Earth-Moon line. This out-of-line bulge caused a torque, slowing the Moon spin, like a wrench tightening a nut. When the Moon’s spin slowed enough to match its orbital rate, then the bulge always faced Earth, the bulge was in line with Earth, and the torque disappeared. That is why the Moon rotates at the same rate as it orbits and we always see the same side of the Moon.Small variations (libration) in the angle from which the Moon is seen allow about 59% of its surface to be seen from the earth (but only half at any instant).The side of the Moon that faces Earth is called the near side, and the opposite side the far side. The far side should not be confused with the dark side, which is the hemisphere that is not being illuminated by the Sun at a given moment (this may be the side facing the Earth, as it is once a month during the New Moon phase). The far side of the Moon was first photographed by the Soviet probe Luna 3 in 1959. One distinguishing feature of the far side is its almost complete lack of maria.

The Moon (Latin: Luna) is Earth’s only natural satellite and the fifth largest natural satellite in the Solar System.The average centre-to-centre distance from the Earth to the Moon is 384,403 km, about thirty times the diameter of the Earth. The Moon’s diameter is 3,474 km, a little more than a quarter that of the Earth. This means that the Moon’s volume is about 2 percent that of Earth and the pull of gravity at its surface about 17 percent that of the Earth. The Moon makes a complete orbit around the Earth every 27.3 days, and the periodic variations in the geometry of the Earth–Moon–Sun system are responsible for the lunar phases that repeat every 29.5 days.

The Moon is the only celestial body to which humans have travelled and upon which humans have landed. The first artificial object to escape Earth’s gravity and pass near the Moon was the Soviet Union’s Luna 1, the first artificial object to impact the lunar surface was Luna 2, and the first photographs of the normally occluded far side of the Moon were made by Luna 3, all in 1959. The first spacecraft to perform a successful lunar soft landing was Luna 9, and the first unmanned vehicle to orbit the Moon was Luna 10, both in 1966. The United States (U.S.) Apollo program achieved the only manned missions to date, resulting in six landings between 1969 and 1972. Human exploration of the Moon ceased with the conclusion of the Apollo program, although several countries have announced plans to send people or robotic spacecraft to the Moon.

Star Formation is the process by which dense parts of molecular clouds collapse into a ball of plasma to form a star. As a branch of astronomy star formation includes the study of the interstellar medium and giant molecular clouds as precursors to the star formation process and the study of young stellar objects and planet formation as its immediate products. Star formation theory, as well as accounting for the formation of a single star, must also account for the statistics of binary stars and the initial mass function.

A star is a massive, luminous ball of plasma. The nearest star to Earth is the Sun, which is the source of most of the energy on Earth. Other stars are visible in the night sky, when they are not outshone by the Sun. For most of its life, a star shines because thermonuclear fusion in its core releases energy that traverses the star’s interior and then radiates into outer space. Almost all elements heavier than hydrogen and helium were created by fusion processes in stars.

Astronomers can determine the mass, age, chemical composition and many other properties of a star by observing its spectrum, luminosity and motion through space. The total mass of a star is the principal determinant in its evolution and eventual fate. Other characteristics of a star are determined by its evolutionary history, including the diameter, rotation, movement and temperature. A plot of the temperature of many stars against their luminosities, known as a Hertzsprung-Russell diagram (H–R diagram), allows the age and evolutionary state of a star to be determined.

A star begins as a collapsing cloud of material composed primarily of hydrogen, along with helium and trace amounts of heavier elements. Once the stellar core is sufficiently dense, some of the hydrogen is steadily converted into helium through the process of nuclear fusion. The remainder of the star’s interior carries energy away from the core through a combination of radiative and convective processes. The star’s internal pressure prevents it from collapsing further under its own gravity. Once the hydrogen fuel at the core is exhausted, those stars having at least 0.4 times the mass of the Sun expand to become a red giant, in some cases fusing heavier elements at the core or in shells around the core. The star then evolves into a degenerate form, recycling a portion of the matter into the interstellar environment, where it will form a new generation of stars with a higher proportion of heavy elements.Binary and multi-star systems consist of two or more stars that are gravitationally bound, and generally move around each other in stable orbits. When two such stars have a relatively close orbit, their gravitational interaction can have a significant impact on their evolution.

The defining dynamic characteristic of a planet is that it has cleared its neighborhood. A planet that has cleared its neighborhood has accumulated enough mass to gather up or sweep away all the planetesimals in its orbit. In effect, it orbits its star in isolation, as opposed to sharing its orbit with a multitude of similar-sized objects. This characteristic was mandated as part of the IAU’s official definition of a planet in August, 2006. This criterion excludes such planetary bodies as Pluto, Eris and Ceres from full-fledged planethood, making them instead dwarf planets.Although to date this criterion only applies to our Solar System, a number of young extrasolar systems have been found in which evidence suggests orbital clearing is taking place within their circumstellar discs.

Planets also have varying degrees of axial tilt; they lie at an angle to the plane of their stars’ equators. This causes the amount of light received by each hemisphere to vary over the course of its year; when the northern hemisphere points away from its star, the southern hemisphere points towards it, and vice versa. Each planet therefore possesses seasons; changes to the climate over the course of its year. The point at which each hemisphere is farthest or nearest from its star is known as its solstice. Each planet has two in the course of its orbit; when one hemisphere has its summer solstice, when its day is longest, the other has its winter solstice, when its day is shortest. Jupiter’s axial tilt is very small, so its seasonal variation is minimal; Uranus, on the other hand, has an axial tilt so extreme it is virtually on its side, which means that its hemispheres are either perpetually in sunlight or perpetually in darkness around the time of its solstices.Among extrasolar planets, axial tilts are not known for certain, though most hot Jupiters are believed to possess negligible to no axial tilt, as a result of their proximity to their stars.

The planets also rotate around invisible axes through their centres. A planet’s rotation period is known as its day. All planets in the Solar System rotate in a counter-clockwise direction, except for Venus, which rotates clockwise(Uranus is generally said to be rotating clockwise as wellthough because of its extreme axial tilt, it can be said to be rotating either clockwise or anti-clockwise, depending on whether one states it to be inclined 82° from the ecliptic in one direction, or 98° in the opposite direction). There is great variation in the length of day between the planets, with Venus taking 243 Earth days to rotate, and the gas giants only a few hours.The rotational periods of extrasolar planets are not known; however their proximity to their stars means that hot Jupiters are tidaly locked (their orbits are in sync with their rotations). This means they only ever show one face to their stars, with one side in perpetual day, the other in perpetual night.